18
Step 3
Attach a vertical closed position stop plate to the
SECOND
gate.
Using appropriate hardware for your type of gate attach
the
vertical
closed position stop plate
to the SECOND gate
frame at the point where it will come in contact with the
ground stop post..
Do not
tighten it completely at this time. You must slide the closed position stop plate toward the
ground
stop
until they touch (
Illustration C
). Once you have moved the stop plate to the correct position, tighten its hardware
completely.
NOTE:
For a push-to-open installation (gate opens
out
from the property) attach the closed position stop plate to the
outside
of the gate.
Post Bracket Assembly
Gate Bracket
MASTER Gate Opener
Closed Position
Positive Stop Plates
SECOND Gate Opener
OPTIONAL Closed Position
Ground Stop Post
Step 2
Install a low profile ground stop (
not
provided
) beneath the
SECOND gate stop plate.
The ground stop needs to be positioned near the end of the
gate as shown in
Illustration A
and may be made of metal
or concrete and should be firmly secured in the ground (we
recommend setting it in concrete).
Closed Position Stop Plate mounted
on the gate leaf that CLOSES FIRST
Closed Position Stop Plate
Low Profile
Ground Stop
in Near the Center of Driveway
FRONT VIEW
SIDE VIEW
Mount Vertically
Illustration C
At this stage of the installation, the openers should be installed on the
gate leaves and the open and closed position stops should be in place.
