Mighty Mule FM137, Инструкция по эксплуатации

Страница: 8 / 16

8
“Learn” Transmitter Code (for wireless installations)
IMPORTANT: Make sure the transmitter operates the gate opener .
Turn off the gate opener so that there is no unintended operation of the gate during the learning process .
Step 1:
Mount the keypad cover using the screws provided .
Step 2: Slide the keypad into the cover and secure with the small screws provided .
1 . Press and release the PROGRAM button .
2 . Enter the Master Code then press and release the PROGRAM button .
3 . Enter
0,5
then press and release the
PROGRAM
button .
4 . Press and hold the transmitter button while holding the transmitter to the bottom of the keypad as shown .
5 . The keypad will beep 3 times to confirm that the transmitter is successfully “Learned .” Release the transmitter button at this
time .
EXAMPLE: Learn transmitter code with Master Code of “1234” . Then press and hold transmitter button until you hear 3 beeps . The
round black dot is the “PROGRAM” button . Go to “Programming the keypad” to change the master code (if desired) .
1 2 3 4 0 5
Turn the gate opener back on and confirm that the keypad operates the gate using the master code .
1 2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0
1 2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0
①
1 2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0
② ③
⑤ ④
IMPORTANT:
Transmitter must be placed exactly as shown, and against the bottom of
the keypad in order for the “learning” process to work correctly.
Press &
Release
Program
Button. Enter Master
Code, Press
& Release
Program
Button again.
Enter
0 5
Press &
Release
Program
Button again.
Press and hold
the transmitter
button holding
it to bottom of
keypad. Keypad will
beep 3 times.
Release the
transmitter
button.
Figure 5