MIGEL GSI 120, Руководство пользователя

Страница: 10 / 12

Simple Repair Methods
Problem
Not enough heat
or Too heat
No steam or Leakage
No burst of steam
or no vertical steam
Leaking water from
Soleplate
Little Steam
Possible Reasons
Rotate thermostat
dial improperly or
unplugging
The thermostat dial has
been set to MIN
The(vertical) burst of
steam function has
been used too often
within a very short
period. The iron is not
hot enough.
Set the thermostat dial
out of steam range.
The heat is still not
enough.
The water is over than
max position
Check if the steam
selector is in proper
location.
Steam hole is blocked.
Too little water in the
water tank
Measurement
Correct Thermostat dial
in position and check if
the iron is plugged.
Set the thermostat
dial to the required
positioin.
Continue ironing in
horizontal position and
wait a while before
using the (vertical)
burst of steam function
again.
Set the thermostat dial
as per steam range.
Open steam button
only after the indicator
light goes off.
Pour out the remaining
water
Set the steam selector
to the proper location.
Clean hole with
distilled water.
Fill water into the box
4