MIGEL GIS 220, Руководство пользователя

Страница: 21 / 23

9
Automatic Calc Clean
Steaming
Note:
The Auto Calc Clean process is automatically
activated after 2L water using.
- The appliance cannot be used during the Auto Calc
Clean process. Do not interrupt the Auto Calc Clean
process
6. When the Auto Calc Clean process is in progress, the
red AUTO CALC CLEAN light turns on.
- This process lasts approximately 3 minutes.
- During this process it is normal for the system to
produce pumping and clicking sounds.
7. After approximately 3 minutes, rinsing water flows
into the rinse tray below.
8. Pull out the rinse tray.
9. Empty the water into the sink.
10. Slide the rinse tray back into the appliance.
The steamer enables you to remove creases with only a few strokes. It is easy
to use, safe for all garments and is a great solution to delicate fabrics like silk.
- Switch on the steamer by pressing the steamer power-
on button.
- The power-on light goes red when heating, turns blue
to indicate that the steamer is ready for use..
- Press the steam trigger to start steaming
Automatic shut-off
- This appliance is equipped with an automatic shut-off function. When
the steam trigger is not used for more than 15 minutes, the appliance
automatically shuts off and goes into the standby mode.
- To deactivate the automatic shut-off function, press the on/off button once
and choose the ironing fabrics