manualshive.com logo in svg

Migatronic SIGMA SELECT 400 S, Руководство пользователя

Поделиться
Скачать
Migatronic SIGMA SELECT 400 S Скачать руководство пользователя страница 27

26

27

BASIC - Error handling 

Error 
code

Cause and solution

E20-00
E20-02
E21-00
E21-06
E21-08

There is no software present in the control 
unit

Download software to the SD card, insert 
the SD card into the control unit and turn 
on the machine. Replace the SD card, if 
necessary.

E20-01
E21-01

The SD card is not formatted

Format the SD card in a PC as FAT and 
download software to the SD card.  
Replace the SD card, if necessary.

E20-03
E21-02

The SD card has several files of the same 
name

Delete files on the SD card and reload 
software.

E20-04

The control unit has tried to load more 
data than there is room for in the memory

Reinsert the SD card or replace the SD card.
If this does not solve the problem, contact 
Migatronic Service.

E20-05
E20-06

Software on the SD card is locked for 
another type of control unit

Use an SD card with software that matches 
your type of control unit.

E20-07

The internal copy protection does not 
allow access to the micro-processor

Reinsert the SD card into the machine or 
contact Migatronic Service.

E20-08
E20-09
E21-05

The control unit is defective

Contact MIGATRONIC Service

E20-10
E21-07

The loaded file is defective

Reinsert the SD card or replace the SD card.

E21-03
E21-04

The welding program package does not 
match this control unit

Use an SD card with software that matches 
your type of control unit.

Err GAS

Gas error

Check the gas supply.
Cancel the gas fault by briefly pressing any 
key.

E02-04

CAN communication error

Check intermediary cable/plug

E11-20

Current sensor error

1.  Check the current sensor
2.  Contact MIGATRONIC service

Fault symbols

Temperature fault

The indicator is switched on, when the power source is 
overheated. Leave the machine on until the built-in fan has 

cooled it down.

Current fault

The indicator flashes when start current or welding current 

is higher than permitted by the welding machine’s efficiency. Make 
sure that wire speed/current and voltage are set correctly.

Fault symbols

The indicator flashes when other types of errors occur. At the 
same time an error code is shown in the display. 

Selected error codes

Mains supply fault

The indicator is displayed, when the mains 

voltage is too high.  
Connect the welding machine to 400V AC, +/-15% 50-60Hz.

Torch cooling fault 

Cooling fault is indicated on machines in case of 

insufficiant circulation of the cooling liquid due to faulty connection, 
defective parts or choking. 
Check that the cooling hoses are correctly connected, top up the 
water tank and check welding hose and branches.  
The cooling fault is cancelled by pressing shortly on the        -key pad.

Gas control fault (IGC)

Gas fault exists due to a to low or high gas flow. 

Make sure that the pressure on the gas flow is higher than 2 bar and 
less than 6 bar, corresponding to 5 l/min and 27 l/min. 
The fault is disconnected by adjusting the manual gas flow to  
27 l/min. The gas fault is reset by a short pressure on the       -key pad.

Wire feed fault 

  or

The indicator is displayed, if the wire feed motor is overloaded.
The wire feed motor or magnet valve may be defective.

Other types of faults 

If other fault symbols are shown in the display, the machine shall 
be switched off and then on to dispose of the symbol. If the fault 
symbol is shown repeatedly, repair of the power source is required.
Contact your distributor with information of the fault. 
When separate units are connected, the following error codes can be 
displayed:

is displayed when the communication between 
the power source and the connected unit(s) is 

lost.

is displayed when controlling the motor is not 
running properly.

is displayed when the motor is overloaded.

Содержание SIGMA SELECT 400 S





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды