Migatronic MigADCplus, Инструкция по эксплуатации

Страница: 11 / 116

► MARKINGS
MigADCplus welding helmet is tested according to the EN 175, EN 166 and EN
379 standards.
MigADCplus-Air welding helmet is tested according to the EN 12941 and EN
14594 standards. The certificates are only valid in combination with one of the
following CleanAIR power unit sets: CleanAIR Basic EVO, CleanAIR Chemical 2F
Plus, CleanAIR Chemical 3F Plus, CleanAIR Pressure Flow Master.
MigADCplus Product name of the helmet shell
MigADCplus ADF Product name of the autodarkening welding filter
4 / 6-8 / 9-13
4 - Protection shade number in open state
6-8 / 9-13 - Protection shade numbers in closed state
MG Manufacturer identification code
1/1/1/1
Optical classes (optical quality, light scattering, homogeneity,
angular dependence)
EN 379 Number of the standard (autodarkening welding filter)
EN 175 Number of the standard (welding helmet)
EN 166 Number of the standard (welding helmet)
EN 12941
Number of the standard (welding helmet combined with pow-
ered filtering devices)
EN 14594
Number of the standard (welding helmet combined with com-
pressed AIR breathing apparatus)
AS1337.1 Number of the standard (welding helmet)
AS1338.1 Number of the standard (autodarkening welding filter)
ANSI-Z87.1
Number of the standard (autodarkening welding filter and
welding helmet)
MG 1 B
MG=Manufacturer identification code, 1=Optical class,
B=Medium energy impact resistance mark
B Medium energy impact resistance mark
9 Molten metals and hot solids resistance mark
CE mark
DIN Plus Conformity symbol for DIN Plus
Instruction Manual
The symbol on the product or on its packaging indicates that
this product may not be treated as household waste. Instead
it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment. By ensur-
ing this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and hu-
man health, which could otherwise be caused by inappropri-
ate waste handling of this product. For more detailed informa-
tion about recycling of this product, please contact your local
city office, your household waste disposal service or the shop
where you purchased the product.
TH3 MigADCplus-Air used with: CleanAIR Basic EVO, CleanAIR Chemical
2F Plus, CleanAIR Chemical 3F Plus.
3B MigADCplus-Air used with: CleanAIR Pressure Flow Master.
10
EN