Migali C-RO-24G, Руководство по эксплуатации, Страница: 30 / 35

- 29 -
8.6 Stove Operation
Before using the stove for the first time, please use a mild detergent
to wipe it clean. Do not use corrosive or abrasives detergent.
Turn the burners on about 15-20 minutes before broiling for preheating,
according to the cooking requirement to adjust the flame size.
Notice: When first preheating, the furnace will smoke above. This is
caused by protective lipids on the grates and other parts are heated, it
is normal, and it will be eliminated after the power up to the maximum for
burning an hour.
8.7 Adjust air input
① Hot plates ：Remove control panel,
unscrew damper solid screw(Fig.11),
revolve damper left to right(Fig.12),
meanwhile, observe flame, to adjust an
appropriate opening degree. Then screw
damper solid screw, make sure the
equipment will not get loose in the
process of moving and translation.
Reinstall control panel.
②： Griddle ：Remove control panel,
unscrew damper solid screw(Fig.13),
revolve damper left to right(Fig.14),
meanwhile, observe flame, to adjust an
appropriate opening degree. Then screw
damper solid screw, make sure the
equipment will not get loose in the
process of moving and translation.
Reinstall control panel.
③: Oven: Open the underside face plate
of oven (figure 6), loosen the fastening
screws of damper(figure 15) and rotate
the damper horizontally (figure 16).
Meanwhile, observe the flame. Adjust the damper to the appropriate opening
Figure13 Figure14
Figure15
Figure15
Figure12 Figure11
Figure16
Figure15