MIG MAGNIMAGE MIG-21X Series, Руководство пользователя

Страница: 25 / 37

3

Please use the correct power supply according that the power
input voltage for this product range is 100 ～ 240V AC,
50/60Hz.

When you need connect or pull out any signal or bound
guideline. Please confirm that all the power supply cords have
been pulled out ahead.

When you need to add hardware device for the mig-21x series
DVI splitter, make sure all of the signals and power cables have
been pulled out ahead.

Before you operate any hardware, please turn off the mig-21x
series DVI splitter 's power, and to set you on the electrostatic
by touching the ground surfaces.

Please use the processor in clean, dry and ventilated
environment, not use it in the high temperature, humidity
environment.

The product is the electronic product; please stay away from
the fire, water and of which is inflammable and blast,
dangerous.

This product is with high pressure components, please don't
open the case or maintain it by your own.

As there is exceptional condition with smoke, ill-smelling,
please turn off the switch at once and contact with the dealers.
Safety instructions