8. Remove
activation magnet from front of device enclosure in order
to activate device reporting.
Additional Mounting Options:
• Dry Van and Reefer Nose Mount Installation
• Dry Van and Reefer Under Trailer Installation
• Chassis Screw Mount Installation
• Chassis Magnetic Mount Installation
• Intermodal Container Door Screw Mount Installation
• Intermodal Container Door Magnetic Mount Installation
• Flatbed Screw Mount Installation
1. Under Trailer Screw Mount
2. Nose Rail Screw Mount
Installation Tips
• Drill holes at 9/64”
• Deburr and paint surfaces when necessary when drilling
• Clean and remove debris and shavings
• Use a lanyard for extra security when using magnets
• When installing on cross member:
1. Mount on cross member located approximately half way
between front and rear of trailer. Cross member must be
in front of and clear of tandem axle slide and rails. Identify
Mounting Location
• Device Orientation to maximize GPS signal
1. Device must be mounted facing up or down for optimum GPS
reception and accuracy
After Install
Remove the activation magnet from the front of the device enclosure
in order to activate device reporting.
