Mienta CM31116A, Инструкция по эксплуатации

Страница: 5 / 20

5
Instructions Manual
To make coffee
Cleaning and maintenance
Filter holder assembly
1) Open the Cover and fill the water tank with as much water for desired cups of coffee.
2) Ensure the water level does not exceed the max level mark inside the water tank.
3) Close the Cover.
4) The water level display in the carafe indicates the number of cups.
5) Open the Cover, put the ground coffee as you need into the permanent filter or
using a clean paper filter before making coffee.
(it takes on average 6-7 g. medium fine ground coffee per cup).
6) Close the Cover.
7) Ensure that the carafe is placed properly in its position.
8) Switch ON the appliance and the pilot lamp illuminates to indicate the unit is on
and the brewing process has begun.
9) After the brewing process finishes, turn the coffee maker OFF and remove
the carafe.The convenient anti-drip valve allows you to remove the carafe for a short
while and put it back without coffee dripping on the warming plate.
10) The appliance is equipped with a ‘keep warm’ function with a non-stick coated
warming plate.
1) Disconnect the appliance.
2) Never immerse the appliance in water.
3) Clean the appliance with a damp cloth only.
4) The carafe can be cleaned with warm water, some washing liquid and
a soft brush. Do not clean the carafe in a dishwasher.
To assemble the filter holder back in place, please follow the following steps:
1-Drop the filter holder in place with the handle in upright position
2-Hold the handle down to lock back in place.
1. 2.