Frequently Asked Questions
The program is canceled and a fault indicator light lights up on
the control field
Problem
Possible cause and solution
The fault indicator light
lights up,
and
ap-
pear alternately on the
time display, and the
buzzer sounds.
The drain is blocked or restricted.
The drain hose has been fixed too high.
Clean the filter and the pump.
The maximum drain height is 39 ⅜" (1 m).
The fault indicator light
lights up,
and
ap-
pear alternately on the
time display, and the
buzzer sounds.
The water intake is blocked or restricted.
Check whether the water supply is turned on
properly.
Check whether the intake hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water intake is blocked.
Clean the filter.
The fault indicator light
lights up,
and
appear alternately on
the time display, and
the buzzer sounds.
The water protection system has reacted.
Close the water supply.
Contact Service.
and
alternate on
the time display and the
buzzer sounds.
There is a fault.
Disconnect the washing machine from the power
supply. Unplug the appliance or switch off the
breaker.
Wait
at least 2 minutes
before reconnecting the
washing machine to the power supply.
Then switch the washing machine on again.
Restart the program.
If the fault message appears again, contact Miele
Customer Service.
During the program, a symbol appears on the time display
Message
Possible cause and solution
is lit up on the time
display.
The program selector was moved to a different
position after the program had started.
Turn the program selector back to the original
position.
48
Содержание WXD 160
Страница 86: ......
Страница 88: ...M Nr 11 622 780 01 en US WXD 160 ...
