Spinning
43
Omitting the final spin (Rinse
hold)
Select the
Rinse hold
Extra.
If Rinse hold is selected, the laundry
remains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be
removed from the drum immediately
after the end of the programme.
Ending a programme with a spin
cycle
The wash programme is set to the
optimum spin speed. You can change
the spin speed.
Touch the
Change spin speed
sensor.
Select the desired spin speed.
Start the final spin with the
Start/Stop
sensor.
Ending a programme without a spin
cycle
Touch the
Change spin speed
sensor.
Select Spin speed
0 rpm
(no spin).
Touch the
Start/Stop
sensor.
Rinse and interim spin
There is a spin cycle after the main
wash and between the rinses. A
reduction in the final spin speed will
also reduce the interim spin speed.
Omitting interim spin and the
final spin
Touch the
Spin speed
sensor.
Select the
0
rpm
setting.
After the last rinse, the water will be
pumped away and the Anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
Содержание WWR 860 WPS
Страница 116: ...M Nr 11 624 160 03 en AU NZ WWR 860 WPS ...