Miele WWD 320 Скачать руководство пользователя страница 49

Страница: 49 / 84

Problem solving guide

The programme is cancelled and a fault indicator light lights up
in the control panel.

Problem

Possible cause and remedy

The fault indicator light



lights up,



and



appear alternately in the
time display and the
buzzer sounds.

The water outlet is blocked or restricted.
The drain hose has been fixed too high.



Clean the drain filter and the pump.



The maximum drain height is 1 m.

The fault indicator light



lights up,



and



appear alternately in the
time display and the
buzzer sounds.

The water inlet is blocked or restricted.



Check whether the tap is turned on properly.



Check whether the inlet hose is kinked.



Check whether there is sufficient water pressure.

The filter in the water inlet is blocked.



Clean the filter.

The fault indicator light



lights up,



and



appear alternately in the
time display and the
buzzer sounds.

The water protection system has reacted.



Turn off the tap.



Call Miele.



and



appear

alternately in the time
display and the buzzer
sounds.

There is a fault.



Disconnect the washing machine from the
electricity supply. Switch off at the wall and
withdraw the plug from the socket, or switch off
the mains circuit breaker.



Wait

at least 2 minutes

before reconnecting the

washing machine to the electricity supply.



Then switch the washing machine on again.



Restart the programme.
If the fault message appears again, contact Miele.

Содержание WWD 320





















































































Результаты поиска

Содержание WWD 320

Отзывы:

Похожие инструкции для WWD 320

Бренды по названию

Популярные бренды

Miele WWD 320, Руководство по эксплуатации

Результаты поиска

Содержание WWD 320

Отзывы:

Похожие инструкции для WWD 320

Бренды по названию

Популярные бренды