Spinning
28
Final spin speed in wash
programmes
When a programme is selected, the
sensor for the optimum spin speed for
that programme will be brightly lit up in
the control panel.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is
indicated in the table.
Programme
rpm
Cottons
1400
Cottons
1400
Minimum iron
1200
Delicates
900
Woollens
1200
Shirts
900
QuickPowerWash
1400
Express 20
1200
ECO 40-60
1400
Proofing
1200
Drain/Spin
1400
Separate rinse/Starch
1200
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for the
Cottons
programme, an additional rinse
is introduced.
Deselecting Rinse hold (final
spin)
Touch the
sensor (Rinse hold).
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
Ending a programme with a spin
cycle
The sensor for the optimum spin speed
lights up in the control panel. You can
change the spin speed.
Touch the
Start
/
Add laundry
sensor.
Ending a programme without a spin
cycle
Reduce the spin speed to
.
Touch the
Start
/
Add laundry
sensor.
Omitting rinse and interim spin
and the final spin
Touch the
sensor.
After the last rinse, the water will be
pumped away and the Anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
Содержание WWD 320
Страница 80: ......
Страница 81: ......
Страница 82: ......
Страница 84: ...M Nr 11 409 860 00 en AU NZ WWD 320 ...