Installation
*INSTALLATION*
96
If the holes are not covered,
there is a risk of injury.
To avoid the risk of injury, the holes
for the transit bars must be covered
after the transit bars have been re-
moved!
Fit the covers onto the two holes.
The washer-dryer must not be
moved without the transit bars in
place.
Store them in a safe place for future
use. They must be re-fitted if the ma-
chine is to be moved again (e.g.
when moving house).
Refitting the transit bars
Refitting is carried out by reversing
the procedure.
Installing under a worktop
Building under kits* must only be in-
stalled/dismantled by a specialist.
- A special
building under kit
* is re-
quired. The cover plate included in
the building under kit* replaces the lid
of the washer-dryer. It is necessary to
fit the cover plate for electrical safety
reasons.
- Connections for electricity, water and
drainage should be installed in such a
way that they remain accessible
when the washer-dryer is in its final
position.
The building under kit includes installa-
tion instructions.
* Optional accessories
