Fault
Possible cause
Remedy
The laundry is ei-
ther not spun at
all or not spun
satisfactorily.
The "No final spin"
w
button
was pushed in.
The machine was not able to
distribute the laundry load
evenly. To protect the ma-
chine, laundry was either
only spun at a reduced
speed or not at all.
Always make up mixed loads
consisting of large and small
items.
Large items which tangle or
roll up in the drum (e.g. bath
mats) can cause an imbal-
ance during the spin cycle.
For safety reasons, the ma-
chine does not spin if this is
the case. Attempts to build
up spin speed are repeated,
however, until the time allo-
cated to spinning has ex-
pired.
Check whether
–
the drainage system is
clogged. Clean as de-
scribed in "Cleaning and
care" - "Cleaning the
drainage system".
The machine
shakes during the
spin cycle.
The most likely cause is that
the four machine feet are not
resting securely on the floor.
Level the machine (see "In-
stallation" - "Levelling the ma-
chine").
Weak floorboards not only
lead to excessive noise but
also to shaking during the
spin cycle .
See "Installation" - "Installa-
tion surface.
Problem solving guide
35
