Miele WMV 960 WPS, Руководство по эксплуатации

Страница: 60 / 120

Options
60
Steam smoothing
Steam is injected into the drum at the
end of the wash process. Reducing the
maximum load by 50% will give a better
result. For steam smoothing to work
properly there needs to be a certain
amount of residual moisture still present
in the laundry and so the final spin
speed is adjusted accordingly.
The garments must be suitable for dry-
ing in a tumble dryer
 
and suitable
for ironing
 
.
Soak
For heavily soiled and stained items
with protein stains.
A duration of between 30 minutes and 5
hours in 30 minute increments can be
chosen for the soak process. See "Set-
tings" for more information.
The factory default setting is 30
minutes.
Short
Use this option for light soiling with no
visible staining.
The wash duration is reduced.
Rinse hold
The laundry is not spun after the final
rinse and remains in the final rinse wa-
ter. This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.
Water plus
The water level in the wash and rinse
stages is increased.
You can select by how much the water
level is increased, see "Settings, Water
plus level".
Extra rinse
An additional rinse cycle is carried out
to give a better rinse result.
Not all options are suitable for use
with every programme. You can only
select options which are compatible
with the programme being used.
Please refer to the "Wash programme
chart - Options" on the following page
for a list of suitable programmes.