Miele WDB004 Скачать руководство пользователя страница 49

Страница: 49 / 84

Problem solving guide

During the programme, a symbol appears in the time display

Message

Cause and remedy



lights up

The programme selector was moved to a different po-
sition after the programme had started.



Turn the programme selector back to the original
position.

The programme has been interrupted.



Open the door.



Close the door.

At the end of the programme, an indicator light lights up in the
control panel

Problem

Cause and remedy

The indicator light



lights up.

Excessive foam has built up during washing.



Use less detergent next time, and follow the man-
ufacturer's recommended dosage amounts on the
packaging.

The indicator light



lights up.

A programme using a temperature above 60 °C has
not been run for a long time.



In order to prevent bacteria and unpleasant odours
building up in the machine, run the

Cottons 90 °C

programme using Miele machine cleaner or
powder detergent.

Содержание WDB004





















































































Результаты поиска

Содержание WDB004

Отзывы:

Miele WDB004, Руководство по эксплуатации, Страница: 49 / 84

Результаты поиска

Содержание WDB004

Отзывы: