Miele WCI 860 Скачать руководство пользователя

Страница: 74 / 112

Problem solving guide

General problems with the washing machine

Problem

Cause and remedy

Large amounts of deter-
gent residue remain in
the detergent dispenser
drawer.

The water pressure is too low.



Clean the water inlet filter.



It may be useful to select the

Water +

extra option.

Powder detergent used in conjunction with water
softeners tends to become sticky.



In future, add washing powder into the dispenser
drawer first, and then add the water softener.

Fabric conditioner is not
completely dispensed
or too much water re-
mains in the



com-

partment.

The siphon tube is not correctly positioned or is
clogged.



Clean the siphon, see “Cleaning and care - Clean-
ing the detergent dispenser drawer”.

At the end of the pro-
gramme there is still li-
quid in the capsule.

The small pipe in the detergent dispenser drawer
onto which the capsule is placed is blocked.



Clean the small pipe.

This is not a fault.
For technical reasons a small amount of water will
remain in the capsule.

There is water in the
fabric conditioner com-
partment next to the
capsule.

The



sensor control was not activated.



Activate the



sensor control when a capsule is

next used.

An empty capsule was not removed at the end of the
last wash programme.



Remove and dispose of the empty capsule at the
end of each programme.

There is a blockage in the small pipe in the detergent
drawer onto which the capsule is placed.



Clean the small pipe.

Содержание WCI 860

















































































































Результаты поиска

Содержание WCI 860

Отзывы:

Похожие инструкции для WCI 860

Бренды по названию

Популярные бренды

Miele WCI 860, Руководство по эксплуатации

Результаты поиска

Содержание WCI 860

Отзывы:

Похожие инструкции для WCI 860

Бренды по названию

Популярные бренды