Miele WCI 860 Скачать руководство пользователя

Страница: 72 / 112

Problem solving guide

Messages or faults with the TwinDos system

Problem

Cause and remedy



 is almost empty.
Only a few more pro-
grammes are pos-
sible

The detergent in the cartridge is running low. There is
sufficient left for approx. 4 to 8 wash programmes.



Order a new cartridge.



TwinDos  is
empty. Check wash
results

The cartridge is empty.



Replace the cartridge.



Check if the laundry is clean. There may not have
been enough detergent.
If there was not enough detergent, wash the laun-
dry again.



Use "TwinDos" or
start Maintenance.
See 

TwinDos dispensing via compartment



and/or



has not been used for a long time.



Use TwinDos for one of your next loads.



Carry out the TwinDos maintenance programme as
described in “Cleaning and care – TwinDos main-
tenance”.



TwinDos Mainten-
ance for compart-
ment  and com-
partment  must be
started. See 

TwinDos dispensing via compartment



and/or



has not been used for too long a time. It is possible
that detergent has dried inside the hoses.



Immediately

carry out the TwinDos maintenance

programme as described in “Cleaning and care –
TwinDos maintenance”.

No detergent was dis-
pensed during the main
wash.

TwinDos is deactivated.



Before the next wash programme, ensure that the

TwinDos

sensor control is lit.

Detergent is not dispensed even though the

TwinDos

sensor control is lit.



Give it another try.



If detergent is still not dispensed, call the Miele
Customer Service Department.

The messages shown on this page are examples. They may differ depending on
whether they refer to compartment





Содержание WCI 860

















































































































Результаты поиска

Содержание WCI 860

Отзывы:

Похожие инструкции для WCI 860

Бренды по названию

Популярные бренды

Miele WCI 860, Руководство по эксплуатации

Результаты поиска

Содержание WCI 860

Отзывы:

Похожие инструкции для WCI 860

Бренды по названию

Популярные бренды