Miele W 5928 WPS EcoComfort, Руководство по эксплуатации

Страница: 15 / 88

Reminder to remove transport bars
To avoid the risk of damage, the
transport bars must be removed
before the machine is used for the
first time. See "Installation and
connection" for instructions on how
to do this.
^
After removing the transport bars (if
this has not already been done by
your fitter) press the
OK button.
Reminder to remove the dispensing
unit
^
Open the door and remove the
dispensing unit (liquid detergent
container).
^
Confirm that you have removed the
dispensing unit by pressing the
OK
button.
For safety reasons, spinning is not
possible until the machine has been
prepared for using for the first time.
To activate the spinning function you
must run a wash programme without
laundry.
This will also fill the dispensing
system tube with liquid detergent.
Priming the liquid detergent
dispensing system
See "Installation and connection -
Dispensing unit" for instructions on
how to install and connect the
dispensing unit.
,
The container is designed for
liquid detergent only. Filling it with
other agents, e.g. bleaching agents
or powder detergent will damage
the washing machine and/or the
laundry.
Adding detergent
^
Lift the container off of its base, if
necessary.
The container has a valve in the bottom
which closes automatically when it is
removed from its base.
^
Open the lid of the container.
^
Add liquid detergent up to a
maximum of 1 cm below the top rim
(approx. 5 litres).
^
Close the lid so that the liquid
detergent does not dry out and to
prevent any foreign objects getting
into the container.
^
Place the container back on its base
and press it down firmly to open the
valve in the bottom.
Before using for the first time
15