Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Failure to level the machine can result
in the machine "banging" in the spin
cycle or "walking" across the floor
during operation.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
^
Using the spanner supplied, turn
counter nut
2
in a clockwise
direction. Then turn counter nut
2
together with foot
1
to unscrew.
^
Use a spirit level to check the
machine is standing level.
^
Hold foot
1
securely with a pipe
wrench. Turn counter nut
2
again
using the spanner supplied until it
sits firmly up against the housing.
,
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
Installation and connection
55
Содержание W 5903 WPS
Страница 75: ...75 ...