Fault messages in the display
Problem
Possible cause
Remedy
A
2
Fault
Check drainage
system
– The water outlet is
blocked or
restricted.
– The drain hose has
been fixed too high.
– Clean the drain filter and
the drain pump.
– The maximum delivery
head is 1 m.
2
Fault
Water intake
Open stopcock
– The water inlet is
blocked or
restricted.
Check whether
– the tap is opened wide
enough.
– the inlet hose is kinked.
L
Waterproof
activated
Close stopcock
The water protection
system has reacted.
Call Miele
;
Technical fault
Call the Service
Department
There is a fault.
Start the programme again.
If the fault message
appears again, contact
Miele.
The following will flash
in the display:
Anti-crease
alternately with
Chk detergent
Excessive foam has
built up during
washing.
Use less detergent next
time and follow the
manufacturer's instructions
on dosage given on the
packaging.
A
To switch off the fault message: Switch the washing machine off with
K
button.
Problem solving guide
43
Содержание W 5903 WPS
Страница 75: ...75 ...