Connection to the water
supply
IMPORTANT: Australia and New
Zealand
This appliance must be installed
according to AS/NZS 3500.1.
Backflow prevention is already
integrated in the appliance.
,
The plastic casing of the safety
valve contains electrical
components. The Waterproof system
must only be connected to its own
tap. It must not be connected to
mixer taps or similar and must not
be fitted in areas where there is the
risk of water or other liquids
reaching it. A flexible metal
extension hose, available from Miele
as an optional extra, should be used
if necessary.
Do not dip into any liquid.
The protective sleeve of the hose
must not be damaged or kinked.
The machine should be connected to a
mains water supply in accordance with
local and national safety regulations.
Connection to a household water
softener is not recommended.
The machine is designed to operate
with a flow pressure of between 100
and 1000 kPa. If it is higher than
1000 kPa, it is essential to fit a reducer
valve.
Connection to the mains water supply
should incorporate a mains tap with
3
/
4
"
thread. The tap should be fitted by a
qualified plumber.
,
The connection points are
subject to mains water pressure.
Turn on the taps slowly and check
for leaks. Correct the position of the
washer and union if appropriate.
Installation and connection
69
