Follow steps
A
to
G
to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– The programme selector is at
Finish
.
A
Press the START button and keep it
pressed in whilst carrying out steps
B
to
C
.
B
Switch the machine on with the
I-ON / 0-OFF button.
C
Wait until the START indicator light
comes on . . .
D
. . . and then release the START
button.
E
Turn the programme selector to the
COTTONS 75°C position:
The
Soak/Pre-wash
sequence indicator
light will briefly flash twice in 2 second
intervals, to show that factory Setting 2
is stored in memory.
F
Each subsequent press on the
START button selects a different
setting (see list on previous page).
The
Soak/Pre-wash
sequence indicator
light will flash:
–
x 1
= Setting 1
–
x 2
= Setting 2
–
x 3
= Setting 3
–
x 4
= Setting 4
G
Switch the machine off with the
I-ON / 0-OFF button.
The
Water plus
button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
59