Miele W 360 WPS Скачать руководство пользователя страница 31

Страница: 31 / 68

Locking functions

Electronic programme locking

Programme locking prevents the ma-
chine from being opened or the pro-
gramme cancelled during a wash
programme.

To activate programme locking

After the start of a programme, press
the START button for at least 4 sec-
onds until the

locked

check light

(lower right on the control panel)
comes on.

Programme locking is now activated.

The machine will now not accept any
changes and the programme will pro-
ceed through to the end.

Programme locking is deactivated auto-
matically at the end of the programme.

Deactivating programme locking
early

Press the START button for at least 4
seconds until the

locked

check light

(lower right on the control panel)
goes out.

Exception:

If the programme selector has been
moved and the

Anti-crease/Finish

indi-

cator light is flashing in the sequence
display.

First, turn the programme selector
back to the programme chosen pre-
viously. The

Anti-crease/Finish

indi-

cator light will go out.

Now press the START button for at
least 4 seconds until the

locked

check light (lower right on the control
panel) goes out

Locking functions

Содержание W 360 WPS





































































Результаты поиска

Содержание W 360 WPS

Отзывы:

Похожие инструкции для W 360 WPS

Бренды по названию

Популярные бренды

Miele W 360 WPS, Руководство по эксплуатации

Результаты поиска

Содержание W 360 WPS

Отзывы:

Похожие инструкции для W 360 WPS

Бренды по названию

Популярные бренды