Top-up rinse for Cottons
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Top-up rinse takes place when a
temperature of 95°C is selected.
Top-up rinse should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
the Top-up rinse for
Cottons
deactivated.
Follow steps
A
to
G
to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– The programme selector is at
Finish
.
A
Press the
Start
button and keep it
pressed in whilst carrying out steps
B
-
C
.
B
Switch the machine on with the
I-On/0-Off
button.
C
Wait until the
Start
button indicator
light comes on . . .
D
. . . and then release the
Start
button.
E
Turn the programme selector to the
Cottons 30°C
position:
A
P
will flash in the display alternating
with the number
0
or
1
.
0
= Top-up rinse is
deactivated
.
1
= Top-up rinse is
activated
.
F
Press the
Start
button to change the
display from
0
to
1
or from
1
to
0
.
G
Switch the machine off with the
I-On/0-Off
button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
60
Содержание W 3444 WPS
Страница 63: ...63 ...
Страница 64: ...Alteration rights reserved 0906 W 3444 WPS M Nr 06 475 430 05 en GB ...