Follow steps
A
to
G
to programme
and store a setting in memory.
The programmable functions are acti-
vated to call up further features not
shown on the control panel by using the
additional option buttons in combina-
tion with the programme selector.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at
Finish
.
A
Press the START button and keep it
pressed in whilst carrying out steps
B
to
C
.
B
Switch the machine on with the
I-ON/0-OFF button.
C
Wait until the START indicator light
comes on . . .
D
. . . and then release the START but-
ton.
E
Turn the programme selector to the
COTTONS 75°C position:
The
Soak/Pre-wash
sequence indica-
tor light will briefly flash twice in 2
second intervals, to show that factory
Setting 2 is stored in memory.
F
Each subsequent press on the
START button selects a different set-
ting.
The
Soak/Pre-wash
sequence indicator
light will flash:
–
x 1
= Setting 1
higher rinse water level selected
–
x 2
= Setting 2
higher water level in the main wash
and rinses (factory setting)
–
x 3
= Setting 3
extra rinse in the
COTTONS programme
–
x 4
= Setting 4
higher water level in the main wash
and rinses and an extra rinse in the
COTTONS programme
G
Switch the washing machine off with
the I-ON/0-OFF button.
The
Water plus
button has now been al-
located the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
61
Содержание W 320
Страница 58: ...58 ...
Страница 59: ...Programmable functions for changing standard settings ...
Страница 66: ...66 ...
Страница 67: ...67 ...