A fault indicator light comes on but the wash programme con-
tinues as normal.
Fault indicator
Possible cause
Remedy
A
The Check drain light
flashes.
The drain outlet is re-
stricted.
Clean the fluff (drain) filter
and drain pump.
The Check inlet light
flashes.
The water inlet is re-
stricted.
Check whether
–
the stopcock is opened
wide enough.
–
the inlet hose is kinked.
The filter in the inlet
hose is dirty.
Clean the filter.
The Excess detergent
check light comes on.
Excessive foam has
built up during wash-
ing.
Use less detergent next
time and follow the recom-
mendation on the packag-
ing.
The Main wash indicator
light flashes in the
programme sequence
display.
There is a fault.
Start the programme again.
If the fault indicator occurs
again, contact the Service
Dept.
The Anti-crease/Finish
indicator light flashes in
the programme se-
quence display.
The position of the programme selector was altered
after the start of the programme. Turn the
programme selector back to the programme previ-
ously chosen.
A
To switch off the fault indicator: Switch off the machine with the I-ON/0-OFF but-
ton and turn the programme selector to
Finish
Problem solving guide
39
Содержание W 320
Страница 58: ...58 ...
Страница 59: ...Programmable functions for changing standard settings ...
Страница 66: ...66 ...
Страница 67: ...67 ...