Miele W 2839I WPM, Руководство по эксплуатации

Страница: 43 / 80

Fault messages in the display
Problem Possible cause Remedy
A
2
Fault
Check drainage
system
– The water outlet is
blocked or
restricted.
– The drain hose has
been fixed too high.
– Clean the drain filter and
the drain pump.
– The maximum delivery
head is 1 m.
2
Fault
Water intake
Open stopcock
The water inlet is
blocked or restricted. Check whether
– the stopcock is opened
properly.
– the inlet hose is kinked.
– the water pressure is too
low.
L
Waterproof system
activated
Close the stopcock
The water protection
system has reacted. – Close the stopcock.
– Call the Service
Department.
;
Technical fault.
Call the Service
Department
There is a fault. Start the programme again.
If the fault message
appears again, contact the
Service Department.
The following flashes in
the display:
Anti-crease
alternately with
Check detergent
Excessive foam has
built up during
washing. Use less detergent next
time and follow the
manufacturer's instructions
on dosage given on the
packaging.
A
To switch off the fault message: Switch the machine off with the
K
button.
Problem solving guide
43