Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
^
Using the spanner supplied turn
counternut
2
in a clockwise direction.
Then turn counternut
2
together with
foot
1
to unscrew.
^
Use a spirit level to check the
machine is standing level.
^
Hold foot
1
securely with a pipe
wrench. Turn counternut
2
again
using the spanner supplied until it
sits firmly up against the housing.
,
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
Installation and connection
46
Содержание W 1714
Страница 62: ...62 ...
Страница 63: ...63 ...
Страница 64: ...Alteration rights reserved 3309 W 1714 M Nr 07 171 020 03 ...