background image

Fragrance flacon

35

FragranceDos – 2 positions for
inserting a fragrance flacon

Fragrance flacons (optional
accessories) can be used to give your
laundry a pleasant scent.

This dryer has 2 places for inserting
fragrance flacons. This gives you a
choice of how to use them.

- Use both positions if you wish to

change from one scent to another.
You can close the fragrance flacon
that you are not using.

- Both positions can be used for a

more intense scent of the same
fragrance.

- Use one socket only if you only want

to use the one fragrance.

Risk of fire and harm to health if

fragrance flacons are used
incorrectly.
Leaked fragrance can be harmful to
your health if it comes into contact
with your body. Leaked fragrance
can cause a fire.
Before using a fragrance flacon,
please read the section "Using a
fragrance flacon (optional
accessory)” in the Warning and
Safety instructions.

Using a fragrance flacon

Removing the protective seal from
the fragrance flacon

Only hold the fragrance flacon as
illustrated. Do not hold it at an angle
or tip it as the fragrance will leak out.

Hold the fragrance flacon securely so
that you do not open it by mistake.

Pull off the protective seal.

Содержание TWF 720 WP

















































































Отзывы: