Operating the tumble dryer
14
Display h min
The display shows:
– The programme duration (
h min
=
hours and minutes)
– Check and fault messages
– Programmable functions
The programmable functions are
used to alter the dryer's electronics
to suit different requirements.
See "Programmable functions" for
more information.
Estimated time remaining
The estimated programme duration will
appear in the
h min
display in hours
and minutes (estimated time remaining).
Exception:
Timed drying
programmes
which last for the duration stated in the
control panel.
The following factors can all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply. The
electronics continually assess
conditions in the appliance and adjust
the estimated time remaining with
increasing accuracy. Because of this,
the time displayed can alter during the
course of a programme.
Drum lighting
When the dryer is switched on at the
mains and the door is opened, the
drum lighting will come on. It will go out
a few minutes later to save energy.
Before using for the first time
Before using the tumble dryer for
the first time, ensure that it is
correctly installed and connected.
Содержание TDA 140 C
Страница 58: ......
Страница 60: ...M Nr 09 938 570 00 en GB TDA 150 C ...