Miele TCJ 690 WP, Руководство по эксплуатации

Страница: 88 / 92

Settings
88
Remote control
The
Remote control
setting (available
depending on country) is only visible if
the
Miele@home setting is set up and
activated.
Once the Miele@mobile App has been
installed on your mobile device, you
can check the status of your dryer
from anywhere and start it remotely.
You can also control it remotely via the
MobileControl programme.
You can switch off the Remote control
setting if you do not want to operate the
dryer with your mobile device.
If Remote control is not switched on, the
app can cause the programme to be
cancelled.
Use the Delay start sensor to set a time
by when you want to start the dryer
(see “Delay start/SmartStart”).
The dryer will then start within the
specified timeframe when it receives
your signal.
If it has not received a start signal by
the latest start time set, the dryer will
start automatically.
Remote control is activated as
standard.
SmartGrid
The
SmartGrid
setting (available
depending on country) is only visible if
the
Miele@home setting is set up and
activated.
This function can be used for starting
your dryer automatically at a time
when energy rates are more
economical.
Activating SmartGrid gives the Delay
start sensor a new function. You can set
the SmartGrid via the Delay start sensor.
The dryer will then start within the
timeframe specified when it receives a
signal from the energy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the dryer will start automatically
(see “Delay start/SmartStart”).
SmartGrid is deactivated as standard.