manualshive.com logo in svg

Miele T 9446 C, Руководство по эксплуатации

Поделиться
Скачать
Miele T 9446 C Скачать руководство пользователя страница 28

Cleaning them with water

If there is a great deal of compacted
fluff on any of the filters, they can be
removed and cleaned under hot
running water.

^

Open the door and pull the fluff filter
out of the door as described
previously.

The two filters in the door opening can
also be removed if you need to clean
them with water.

^

Turn dial

a

and pull the filter by the

dial out of the door opening as shown

b

. Do the same on the other side.

^

Rinse all the filters under hot, running
water.

^

Then shake the filters until no more
water droplets are visible.

^

Dry the filters thoroughly with care.

^

Clean the area underneath these
filters, e.g. with a vacuum cleaner.

,

Do not replace them if they are

damp or wet. Damp or wet filters
could cause operational faults.

^

Push the large filter back into the
door holder until it clicks into position.
Ensure it is facing the correct way.

^

Replace the filters in the door
opening by first inserting them at the
bottom and then pressing them into
place at the top.

^

Lock both dials.

Cleaning and care

28

Содержание T 9446 C

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды