Problem
Possible cause
Remedy
There are humming
noises.
The compressor is
operating.
None. These noises are quite
normal and do not indicate a
fault.
The display is dark.
The programme
selector is not lit up.
The Start/Stop button
light flashes slowly.
The display has
switched off
automatically to save
energy (Standby mode).
The light of the
programme selector
goes out when selecting
Menu
J
.
The display will light up
when one of the buttons is
pressed.
A programme cannot
be started.
There is no immediate
cause.
– Is the dryer switched on?
– Is the mains plug plugged
in?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
Power cut
When power is restored to the dryer after a power cut,
the programme will continue as long as the cooling
down phase had not been reached.
The display is in a
different language.
A different language has
been selected.
Set the language you want.
The
flag symbol
J
will guide
you.
The Start/Stop button
light flashes when a
programme is being
selected.
This is not a fault.
The flashing indicates
that a programme can
be started.
After the programme has
started, the flashing will
change to a constant light.
The interior drum
lighting does not
come on.
The lighting switches off
automatically (to save
energy).
– Switch the dryer off and
then on again.
– If the lamp needs to be
replaced, follow the
instructions in "Changing
the lamp" at the end of this
section.
Problem solving guide
44
Содержание T 8947 WP
Страница 62: ...62 ...
Страница 63: ...63 ...
Страница 64: ...M Nr 09 264 070 01 Alteration rights reserved 2112 ...