Once a programme has started
- changing the programme
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If an attempt is made to change a
selection:
Option not possible
will
appear in the display.
It is still possible to select or deselect
the
Anti-crease
and
Buzzer
Extra
options.
You will need to cancel the current
programme before you can select a
new one.
- cancelling the programme and then
selecting a different programme
^
Press the
Start/Stop
button.
Cancel programme
will appear in the
display.
^
Press the
OK
button.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
If you press the
Start/Stop
button
during the cooling down phase and
confirm by pressing the
OK
button,
Finished
will appear in the display.
^
Press the
Door
button.
^
Close the door.
^
Select another programme and start
it.
Note: A programme can also be
cancelled by turning the programme
selector to
Stop
.
- cancelling the programme and then
removing the laundry
^
Proceed as described below in
"Adding or removing laundry after a
programme has started".
^
Switch the dryer off after closing the
door.
Altering Delay start
^
See "Delay start".
Adding or removing laundry
after a programme has started
^
Press the
Door
button.
^
Open the door.
^
Add or remove items as required.
^
Close the door.
^
Press the
Start/Stop
button.
Time remaining
The time left shown in the display may
now vary from the actual drying time.
Changing the programme sequence
31
Содержание T 8947 WP
Страница 62: ...62 ...
Страница 63: ...63 ...
Страница 64: ...M Nr 09 264 070 01 Alteration rights reserved 2112 ...