Check and fault messages
Problem
Possible cause
Remedy
The Empty container
indicator light comes
on.
The condensed water
container is full or there is
kink in the drain hose.
– Empty the condensed
water container.
– Check the drain hose.
– The indicator light will
go out if you open and
close the door.
The programme stops
and the Machine iron
or Hand iron indicator
light flashes.
The buzzer sounds.
No obvious cause.
– Switch the dryer off and
then on again.
– Then start the
programme again.
If the programme stops
again and the indicator
light flashes again there is
a fault. Contact the Miele
Service Department.
The Finish/
Anti-crease indicator
light flashes while
drying is in progress.
The programme selector
was moved after the start of
a programme. The
programme continues to
run as normal.
Turn the selector back to
the original position and
the indicator light will go
out.
The programme stops
and the Finish/
Anti-crease indicator
light comes on.
The buzzer sounds.
This is not a fault.
The electronic unit has
recognised that there is not
enough laundry in the drum
and cancelled the
programme.
Drying items which are
already dry can also cause
the programme to be
cancelled.
Use the Warm air
programme (timed drying)
to dry individual items.
Before changing a
programme: Open and
close the door.
The Cooling down
indicator light comes
on. The buzzer
sounds.
The dryer is not working
efficiently or economically.
See the previous page
under "Drying is taking
too long ...".
Problem solving guide
31
