Activating and deactivating the
buzzer
A buzzer sounds (at intervals for a
maximum of 1 hour) to let you know
the programme has finished.
The tumble dryer is delivered with the
buzzer activated but you can
deactivate it if wished.
If there is a fault, a continuous tone will
sound even if the buzzer has been
deactivated.
Follow the steps (
A
,
B
,
C
...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at
Finish
.
A
Press the
Start
button and keep it
pressed in whilst carrying out steps
B
-
C
.
B
Switch the dryer on.
C
Wait until the
Start
indicator lamp
lights up constantly . . .
D
. . . and then release the
Start
button.
E
Turn the programme selector to
Cottons Low temperature
.
The
Cool air
lamp will flash four times.
The
flashing sequence of the
Drying lamp
shows which option is
currently selected.
– If the
Drying
lamp is not flashing:
the buzzer is deactivated
– If the
Drying
lamp is flashing:
the buzzer is activated (factory
default setting)
.
F
Pressing the
Start
button switches
between the 2 options.
G
Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^
Carry out steps
A
to
E
.
^
Switch the dryer off after checking
the setting as described above.
Programmable functions
43