Miele T 240, Руководство по эксплуатации

Страница: 26 / 52

Problem Possible cause Remedy
The programme stops
and the "Clean out air-
ways" indicator lamp
flashes. Possible causes and remedies are described above
in ‘The "Clean out airways" lamp comes on.’
No obvious cause. – Switch the dryer off.
– Switch the dryer back
on and start the
programme again.
If the programme stops
again and the "Clean out
airways" indicator lamp
flashes, there is a fault.
Contact the Miele Service
Department.
The "Anti-crease/Finish"
indicator lamp flashes
while drying is in prog-
ress. The programme selector
was moved after the be-
ginning of a programme.
The programme contin-
ues to run as normal. Turn the selector back to
the original position and
the lamp will go out.
The programme is inter-
rupted and the indicator
lamp "Machine iron" or
"Hand iron" flashes and
the buzzer sounds. There is no obvious
cause. – Switch the dryer off.
– Switch the dryer back
on and start the
programme again.
If the programme stops
again and an indicator
lamp flashes, there is a
fault. Contact the Miele
Service Department.
Problem solving guide
26