Miele T 240, Руководство по эксплуатации

Страница: 16 / 52

Short
For drying fabrics which can with-
stand high temperatures, e.g. pure
linens and cottons. Do not use on
minimum iron or delicate fabrics.
– Because the heater rating is in-
creased clothes dry faster thus short-
ening drying times.
Low temperature
For drying delicate fabrics with the
symbol
r
(e.g. acrylic garments) at a
lower temperature.
– Because the heater rating is reduced
clothes dry more slowly thus length-
ening drying times.
Buzzer
An audible tone sounds repeatedly at
the end of a programme.
^
The buzzer can be switched on or off
after a programme has started.
The volume (and pitch) of the buzzer
can be adjusted before a programme is
started:
^
Select the programme.
^
Press the buzzer button (the buzzer
indicator lamp will light up), until the
desired volume / pitch is achieved.
Then release the button.
E
Start the programme.
^
Press the START button.
The drying cycle begins.
The drying stage reached is shown by
the sequence indicator lamps on the
right hand side of the control panel.
At the end of the drying phase, a cool-
ing down phase commences to cool
the laundry down (the
Cool air indicator
lamp lights up).
The drying level required has now been
reached.
F
At the end of a programme
When the drying programme has fin-
ished the
Anti-crease / finish
sequence
indicator lamp will come on and the
buzzer will sound.
The drum will continue to rotate at inter-
vals to prevent the laundry creasing, if
you do not wish to remove it immediate-
ly (anti-crease).
^
Press the
Door
button and open the
drum door.
^
Remove the laundry.
Make sure that the drum is empty. If
items are left in the dryer, they could
be damaged by overdrying when
the dryer is next used.
^
After every cycle remove the fluff
from the fluff filter in the door (see
"Cleaning and Care").
^
After each use, switch the dryer off
by pressing the
l-On/0-Off button.
^
Always close the door after use.
How to dry correctly
16