Connecting to an external
drain
The condensed water can be sent di-
rectly to a drain if the machine is in-
stalled near a sink or standpipe.
The machine is equipped with a
non-return valve that will prevent water
from flowing back into the machine if
there is a problem in the drainage sys-
tem.
Max. drain hose length: 10 ft
Max. drain height: 4 ft.
Supplied accessories:
- 6 ft drain hose
- Hose clamp
- Hose elbow
To make a direct drain connection, pro-
ceed as follows:
Loosen the hose clamp at the drain
outlet at the lower left rear of the ma-
chine and remove the rubber plug.
Remove the clamp from the plug
and place it over the drain hose.
Push the drain hose onto the drain
outlet. Make sure that the hose is
firmly secured by the hose clamp
and is not kinked.
INSTALLATION INSTRUCTIONS
24
