The dishwasher does not fill/drain.
Problem
Possible cause
Remedy
The buzzer sounds.
One of the following
messages appears in
the display:
Water inlet fault
Please open the
stopcock.
The tap is turned off.
Turn on the tap fully.
Water inlet fault F12/F13
Before rectifying the problem,
you must:
– Switch the dishwasher off
using the On/Off sensor
K
.
Water intake is
restricted.
– Turn on the tap fully and
start the programme again.
– Clean the water inlet filter
(see "Maintenance").
– The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
Problem solving guide
60
Содержание Standard
Страница 71: ...Upper basket Lower basket Cutlery tray Comparison tests 71 ...
Страница 95: ...95 ...
Страница 96: ...Alteration rights reserved G5930 G5935 0213 M Nr 09 191 340 02 ...