With the aid of the following guide, minor problems can be easily corrected
without contacting Miele. This will save time and money.
Please note that a call-out fee will be applied for unnecessary service visits where
the problem could have been rectified as described in these Operating instructions.
,
Installation work and repairs to electrical appliances must only be carried
out by a suitably qualified and competent person in strict accordance with
current local and national safety regulations. The manufacturer cannot be held
liable for unauthorised work.
Technical problems
Problem
Possible cause
Remedy
The display remains
dark and the Standby
indicator light is not
flashing after the
dishwasher has been
switched on with the
On/Off sensor
K
.
The appliance is not
plugged in.
Insert the plug and switch
on at the socket.
The fuse is defective or
has tripped.
Reset or replace the fuse.
(Minimum fuse rating - see
data plate).
The dishwasher stops
during a programme.
The fuse is defective or
has tripped.
– Reset or replace the fuse
(Minimum fuse rating -
see data plate).
– If the same mains fuse
trips again, call Miele.
Problem solving guide
58
Содержание Standard
Страница 71: ...Upper basket Lower basket Cutlery tray Comparison tests 71 ...
Страница 95: ...95 ...
Страница 96: ...Alteration rights reserved G5930 G5935 0213 M Nr 09 191 340 02 ...