Miele SmartLine CSDA 7000, Инструкции по эксплуатации и монтажу

Страница: 33 / 72

Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
33
Worktop cutout – surface-mounted
Information for calculating the cutout
The elements overlap the worktop by 10 mm.
When installing several elements, a distance of 2 mm must be observed between
the individual elements.
Calculating cutout dimension B
1 element = Width of the element minus 10 mm on the right, minus 10 mm on the
left
Several elements = Total width of the elements plus 2 mm distance between the
elements, minus 10 mm on the right, minus 10 mm on the left.
Some examples are illustrated below.