Installation
*INSTALLATION*
43
Worktop cut-out – surface-mounted
B
50
0
+1
ß
R 4
B
10
0
10
Information for calculating the cut-out
The appliances overlap the worktop by 10 mm.
When installing several appliances, a distance of 2 mm must be observed between
the individual appliances.
Calculating cut-out dimension
B
1 appliance = width of the appliance minus 10 mm on the right, minus 10 mm on
the left
Several appliances = total width of the appliances plus 2 mm distance between
the appliances, minus 10 mm on the right, minus 10 mm on the left.
Some examples are illustrated below.
Содержание SmartLine CS 7101
