Miele SmartLine CS 7101 страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 72

background image

Warning and Safety instructions

9



Never open the casing of the wok burner.

Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.



The manufacturer's warranty will be invalidated if the appliance is

not repaired by a Miele authorised service technician.



Faulty components must only be replaced by genuine Miele spare

parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.



The wok burner is not intended for use with an external timer

switch or a remote control system.



Connection to the gas supply must be carried out by a suitably

qualified and competent gas fitter. If the plug has been removed or
the connection cable is not supplied with a plug, the appliance must
be connected to the mains supply by a suitably qualified electrician.



If the mains connection cable is damaged, it must be replaced

with a special mains connection cable, available from Miele, by a
Miele authorised service technician or suitably qualified and
competent electrician in order to avoid a hazard (see “Installation -
Electrical connection”).



During installation, maintenance and repair work, the wok burner

must be completely disconnected from the mains electricity supply.
The gas supply must also be turned off. It is only completely isolated
from the gas and electricity supply when:

– the main circuit breaker has been disconnected, or

– it is switched off at the wall socket and the plug is withdrawn from

the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.

– the gas inlet valve is closed.

«
...
7
8
9
10
11
...
»

Содержание SmartLine CS 7101









































































Отзывы:

Нет отзывов

Похожие инструкции для SmartLine CS 7101

Ruby Fires 11814

Бренд: Ruby Decor Страницы: 24

Бренд: baltur Страницы: 134

economite RE6700B

Бренд: Midco Страницы: 16

Бренд: Viking Страницы: 9

Бренд: baltur Страницы: 49

Бренд: Unigas Страницы: 40

Бренд: Town & Country Fireplaces Страницы: 20

Бренд: Town & Country Fireplaces Страницы: 20

Бренд: KINTERA Страницы: 19

Бренд: Char-Broil Страницы: 36

Бренд: Wolf Страницы: 2

Бренд: Ariterm Страницы: 28

Бренд: Ariterm Страницы: 44

Бренд: DOMUSA TEKNIK Страницы: 12

Бренд: Summerset Страницы: 18

Бренд: Oilon Страницы: 35

ImmersoJet 2" IJV2

Бренд: Eclipse Combustion Страницы: 24

Бренд: Uberhaus Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды