Miele SmartLine CS 7101-1 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 72

Miele SmartLine CS 7101-1 Скачать руководство пользователя страница 37

Installation

*INSTALLATION*

37

Safety instructions for installation



Damage risk from incorrect installation.

Incorrect installation can cause damage to the SmartLine element.
The SmartLine element must only be installed by a qualified person.



Damage from falling objects.

Take care not to damage the SmartLine element when fitting wall units or a
cooker hood above it.
Fit the wall units and the cooker hood before the SmartLine element.



The room in which the SmartLine element is installed must con-

form to all relevant local and national building regulations and safety
regulations.
In the UK: GasSafe regulations



The veneer or laminate coatings of worktops (or adjacent kitchen

units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.



A deep fat fryer must not be installed directly next to a gas hob or

a wok burner as the gas flames could ignite the fat in the fryer. It is
essential to maintain a distance of at least 288 mm between these
two appliances.



The SmartLine element must not be installed over a fridge, fridge-

freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.



When installing the SmartLine element, make sure that the gas

pipe and mains connection cable cannot come into contact with hot
appliance parts.



The mains connection cable and any flexible gas connection pipes

must be installed in such a way so that they do not come into con-
tact with any moving kitchen parts (e.g. a drawer) after the SmartLine
element has been installed, and that they cannot be subjected to any
mechanical action which could cause damage.

«
...
35
36
37
38
39
...
»

Содержание SmartLine CS 7101-1









































































Отзывы:

Нет отзывов