Miele SLQL0, Руководство по эксплуатации

Страница: 65 / 172

en
65
Problem solving guide
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.

Switch the robot vacuum cleaner off before dealing with any problems. To
switch it off, press the I / 0 switch on the side of the robot vacuum cleaner to the
0 position.
Problem Cause and remedy
The robot vacuum
cleaner switches itself
off after it has been
switched on using the
Power button. The rechargeable battery is not sufficiently charged.

Connect the robot vacuum cleaner correctly to the
charging contacts on the connected base station.
The cleaning result is
poor. The dust box is full.

Empty and clean the dust box.
The roller brush is dirty or worn out.
 Clean the roller brush.

Replace the roller brush.
The seals on the dust box are dirty or worn out.
 Clean the seals and the suction channel between
them.

Replace the seal unit.
The exhaust filter is dirty.
 Clean the exhaust filter.

Replace the exhaust filter.
The side brushes have worn out.
 Replace the side brushes.
The robot vacuum
cleaner is not charging. The base station is not connected correctly.

Connect the base station exactly as described in
these operating instructions, see section “Prepar-
ing for use – Connecting the base station”.