Miele SGDE0, Руководство по эксплуатации

Страница: 14 / 100

en-US
14
References to illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these Operating Instruc-
tions.
Preparing for use
Attaching the suction hose (Fig. 01)
 Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
Disconnecting the suction hose
(Fig. 02)
 Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connecting the suction hose to the
handle (Fig. 03)
(required depending on model)

Insert the suction hose into the han-
dle until it clicks into position.
Connecting the handle to the wand
(Fig. 04)

Insert the handle into the wand until it
clicks into position. To do this, line up
the guides on the two pieces.

To release the handle from the wand,
press the release button and pull the
handle out of the wand, twisting it
slightly as you do so.
Adjusting the telescopic suction
wand
Depending on the model, your vacuum
cleaner will be fitted with one of the fol-
lowing suction wands:
– Telescopic suction wand
– Comfort telescopic suction wand
One part of the telescopic suction wand
is packed inside the other and it can be
adjusted to suit your height for comfort-
able vacuuming.
Telescopic suction wand (Fig. 05)
 Press the release button and adjust
the telescopic suction wand to the re-
quired length.
Comfort telescopic suction wand
(Fig. 05)

Grasp the release mechanism and
adjust the telescopic suction wand to
the required length.
Connecting the telescopic wand to
the floorhead/floorbrush (Fig. 06)
(included as standard depending on
model)
 Push the telescopic wand into the
suction nozzle and turn it clockwise
or counter-clockwise until it clicks
into position.

To detach these parts from each
other, press the release button and
pull the telescopic wand out of the
suction nozzle, twisting it slightly as
you do so.